Automatic configuration

Automatic configuration

1. On the control panel menu, press OK.
2. Use the < or the > button to select Network Config., and then press OK.
3. Use the < or the > button to select TCP/IP config, and then press OK.
4. Use the < or the > button to select Automatic, and then press OK.

It might take several minutes before the automatic IP address is ready for use.

HP color laserjet 2700 note Automatic configuration NOTE

If you want to disable or enable specific automatic IP modes (such as BOOTP, DHCP, or AutoIP), these settings can be changed by using the embedded Web server or the HP ToolboxFX only.

HP color laserjet 2700 Automatic configuration