Link speed and link duplex settings

Link speed and link duplex settings

HP color laserjet 2700 note Link speed and link duplex settings NOTE

Incorrect changes to the link speed and link duplex settings might prevent the printer from communicating with other network devices. For most situations, use the Automatic mode.

Making changes causes the printer to restart. Make changes only while the printer is idle.

1. On the control panel menu, press OK.
2. Use the < or the > button to select Network Config., and then press OK.
3. Use the < or the > button to select Link Speed, and then press OK.
4. Use the < or the > button to select one of the following settings.
● 10T Full
● 10T Half
● 100TX Full
● 100TX Half
HP color laserjet 2700 note Link speed and link duplex settings NOTE

The printer setting must be the same as the setting for the network device to which you are connecting (a network hub, switch, gateway, router, or computer).

5. Press OK. The printer restarts.
HP color laserjet 2700 Link speed and link duplex settings