To change the print cartridge
| 1.
| Open the front door.
| CAUTION
|
Do not place anything on the transfer unit and do not touch the transfer unit, which is located on the inside of the front door.
|
|
| 2.
| Remove the used print cartridge from the printer.
|
| 3.
| Remove the new print cartridge from the bag. Place the used print cartridge in the bag for recycling.
|
| 4.
| Grasp both sides of the print cartridge and distribute the toner by gently rocking the print cartridge from front to back.
|
| CAUTION
|
Do not touch the shutter or the surface of the roller.
|
|
| 5.
| Remove the orange shipping locks and the shipping tape attached to the left shipping lock from the new print cartridge. Discard the shipping tape and shipping locks according to local regulations.
|
| 6.
| Align the print cartridge with the tracks inside the printer, and using the handles, insert the print cartridge until it is firmly seated.
|
| 7.
| Firmly close the front door.
After a short time, Ready should appear on the control panel.
|
| 8.
| Installation is complete. Place the used print cartridge in the box in which the new cartridge arrived. See the enclosed recycling guide for recycling instructions.
|
| 9.
| If you are using a non-HP print cartridge, check the printer control panel for further instructions.
|
For additional help, see the Web sites listed in Supply replacement guidelines.
HP color laserjet 2700 To change the print cartridge