| 1.
| Load paper into tray 1, tray 2, or optional tray 3.
If you are using letterhead paper, load it face-down, with the top edge at the back of the tray.
|
| 2.
| Open the printer driver.
|
| 3.
| Select the appropriate size and type.
|
| 4.
| On the Finishing tab, select Print on Both Sides (Manually).
| NOTE
|
The default setting is to bind on the long edge for pages in portrait orientation. To change to short-edge binding, select the Flip Pages Up check box.
|
|
| 5.
| Click OK to print the first side.
|
| 6.
| Go to the printer. When the Load Tray 1 prompt appears, remove any blank paper from tray 1. Remove the printed stack from the output bin and insert the stack into tray 1 with the printed side up, and the top edge toward the printer.
|
| NOTE
|
Do not discard any blank sheets from the printed stack. If your manual 2-sided print job contains more than 100 pages, insert up to 100 pages into tray 1.
|
|
| 7.
| Press OK to print the second side.
|
| 8.
| If your manual 2-sided print job contains more than 100 pages, the Load Tray 1 prompt appears. Insert up to 100 pages into tray 1, and then click OK to continue printing the second side.
|